End Dumps

Designed to haul heavy loads, all of our end dump trailers  are made with premium materials to ensure long-lasting durability and reliability. For complete customer satisfaction, we stand behind what we sell.

Get an End Dump Today

USED 2016 RANCO ED26-34 ANVIL END DUMP
View now
2024 RANCO ANVIL END DUMP
View now
2023 Ranco ED48-38
View now
Ranco Anvil Dump Body
View now

Why Buy A Ranco

Designed for quality, all of our two-axle and three-axle bottom dump trailers are perfect for all your heavy-duty hauling needs. With plenty of technological properties, our bottom dump trailers are made to quickly and efficiently get the job done.

Contact our experts in trailer sales
(888) 424-4004 to get a quote today.

See our features

Order an End Dump

Aluminum Extruded / Double Wall

  • 468″ Length
  • 39′ OAL, At Lower Rail
  • 60″ High Sides
  • Full DOT Sealed Lights

Mini Aluminum

  • Commodity: Non-Demolition Materials
  • 312” Length
  • 26’ OAL, At Lower Rail
  • 54” High Wall
  • Full DOT LED Sealed Lights

Light Weight Aluminum

  • Commodity: Non-Demolition Materials
  • 468″ Length
  • 39′ OAL at Lower Rail
  • 60″ High Sides
  • Full DOT LED Sealed Lights

Drill Cutting

  • 20 Cu Yd Capacity
  • 26’4” OAL Length
  • 24’ Body Length
  • 22’ 7.5” Bridge
  • 200” Cylinder Length
  • 45˚ Dump Angle

Super 12 Elliptical

  • 28 yd Capacity, 31 yd at Bangboards
  • 26′ OAL, 24′ Tub Length
  • 54″ High Wall
  • 96″ Wide Box, 102″ Wide Axles

Frameless High Cube

  • 95 Cu Yd Capacity
  • 45′ OAL Length
  • 43′ Tub Length
  • 102″ High Walls
  • 96″ Wide Box
  • 102″ Axles

Anvil Quarter Frame

  • Circuit Breaker Protected Sealed Beam Lights
  • Wiring in Loom and Enclosed in Trailer Frame
  • Sealed Document Holder
  • Optional Paint Colors

Frameless Anvil

  • Parking legs: Adjustable mounted on draft arms
  • Truss Design Draft Arms, 3” x 4” — 76” Wide at Hinge
  • Bolt on Front & Rear Fenders
  • Front Mounted Ladder
  • High Lift Tailgate — 76” Clearance between raised gate & body -or-Combination Gravity Lift and Barn Type Door
  • Hutchens H-903, 50,000 lb. Single Point Suspension
  • Ranco End Dump Features

    Discover why Ranco has been a leading manufacturer of end dump trailers for over 30 years. The Ranco Anvil is a uniquely designed demolition end dump trailer that’s loaded with many design features that yield tremendous benefits. Designed to haul heavy loads, all of our end dump trailers  are made with premium materials to ensure long-lasting durability and reliability. For complete customer satisfaction, we stand behind what we sell. The Ranco end dump trailer line is one of the highest rated construction trailers in North America. With a host of unique, technological properties, the Anvil comes standard with all types of features that make getting the job done simple and effective. You won’t find a more dependable trailer than a Ranco end dump trailer.

    Listed here are just a few of the many features that put Ranco Anvil end dump trailers above the rest. If you’re interested in buying an Anvil End Dump, we have many sizes to choose from. Give our trailer sales experts a call at 888-424-4004 to get a fast, free quote today.

    Constant radius

    The Anvil’s body is a constant radius half-round shape, which makes it lighter and more dent resistant than an elliptical or flat-bottomed round-side body trailer. It will also center the load more precisely, resulting in reduced off-center loading.

    Increased stiffness

    To increase stiffness, reduce sway and increase stability, the entire perimeter of the round body and bulkhead is welded to a thick-wall, boxed structural member. Ranco has also developed fabricated box members for the upper coupler/king pin plate, as well as fabricated the draft arm from thick-walled rectangular tubing which is then trussed with the rectangular tubing set at 45 degrees. This provides maximum torsional stiffness for ultimate stability for all the end dump trailers for sale on the lot.

    Inverted trunion

    The inverted trunnion style hydraulic dump cylinder has a lower maintenance and a longer service life than an end pin style cylinder. There are dirt wiper seals on the bottom of each stage to prevent dirt from settling and building up in the cylinder. The combination of an inverted cylinder and dirt seals keep the cylinder cleaner, instead of pushing through the dirt and working it into the cylinder like pin style cylinders do. This results in a longer life and less maintenance.

    Greater capacity

    The cylinder moves away from the body during dumping which results in greater cubic capacity regardless of the length of the body. Unlike pin style cylinders, there is no need for a dog house or any space taker to accommodate cylinder intrusion into the body, which takes away from the trailer’s capacity. This means that the Anvil gains approximately 1 cubic yard of additional capacity by using the inverted trunnion style dump cylinder.

    Easier maintenance

    In addition to greater capacity and stability, the inverted trunnion design also provides easier hydraulic cylinder maintenance. The vertical mounting of the cylinder has open top access, readily accessible and easy to remove externally mounted trunnion bearings, and an independent rod end bearing shaft.  This means that the cylinder can be easily disconnected and lifted straight out for repair or replacement, and then easily reconnected.  This can all be done without affecting any other parts of the trailer.

    AR400 heat treated alloy

    Round bottom end dump bodies fabricated of AR400 heat treated alloy plates are able to withstand tremendous punishment of impact and abrasion from large, hard and sharp rocks and broken concrete.  AR400 steel is strong and tough plus it provides adequate formability and welding capabilities so it can be fabricated directly into a structural body instead of being used as a liner over a lower strength steel body.  This results in thinner body steel and thus a lighter body that will easily outlast any conventional steel body—including bodies made out of T-1 high strength heat treated alloy steel.

    Increased body thickness

    The thickness of Anvil’s body shell increases at the rear of the body. In all end dump trailers the wear of the body’s shell is more rapid near the rear or dumping end, so increased body thickness in this area of the Anvil extends the life of the trailer’s body.

    Dual tires

    Four sets of dual tires with suspension equalization spread the load over a large area and reduce the degree of body sway that may occur due to uneven compaction and surface elevation.

    Vertical rear body cut off

    There is a vertical, rear body cut off and rear bolster. The vertical body cut off increases the cubic capacity of any given length of the Anvil’s body, and the vertical rear bolster and body cut off allow for interchangeable tailgates. For example, the standard high lift tailgate with its air lift cylinder can be replaced with a conventional top hinged, gravity opened tailgate or a barn door style tailgate, providing several options for each end dump trailer for sale here at Ranco.

    Dump at a 46° angle

    The Anvil or Ranco end dump trailer body is designed to dump at a 46° angle with the standard cylinder and up to 51° angle with an optional cylinder. The steep dumping angles ensure that virtually all materials hauled will be dumped out of the dump body.

    Rugged high-lift tailgate

    The Anvil has a very rugged high-lift tailgate and hinge de­sign. The high-lift tailgate reduces the chance of expensive damage that can occur from an occasional large rock bouncing and impacting the gate during the dumping cycle.

    Contact our Sales team today to answer any question
    Sales (888) 424-4004

    Contact us